How Much Does a Concrete Patio Cost in 2025?
A concrete patio is one of the most cost-effective outdoor improvements you can make. Material costs run $3–$7 per square foot for the concrete itself, with total installed costs of $6–$18 per square foot depending on finish, thickness, and labor in your area. Here's what drives the price and how to estimate your project accurately.
| Project Size | Low | High |
|---|---|---|
| 10×10 ft (4" thick) | $600 | $1,200 |
| 12×20 ft (4" thick) | $900 | $1,900 |
| 20×20 ft (4" thick) | $2,000 | $4,000 |
| 10×10 ft (6" thick) | $800 | $1,500 |
| Any size — stamped | +$8/sq ft | +$18/sq ft |
| Demo existing concrete | $1–$2/sq ft | $3–$5/sq ft |
Average Cost by Patio Size
A standard 10×10 patio (100 sq ft) at 4 inches thick uses about 1.2 cubic yards of concrete. Ready-mix costs roughly $125–$150 per cubic yard delivered, putting concrete material alone at $150–$180 for that size. With forms, rebar, finishing, and labor, the all-in cost for a basic broom-finished patio typically runs $600–$1,200 installed. Larger patios (20×20) spread fixed costs over more area and often come in closer to $8–$12 per sq ft installed.
Factors That Change the Price
Thickness matters most — a 6-inch slab (for driveways or heavy use) uses 50% more concrete than a 4-inch patio slab. Finish type dramatically affects labor cost: broom finish is cheapest, exposed aggregate adds $2–$4/sq ft, and stamped concrete adds $8–$18/sq ft on top of the base slab cost. Site access, soil conditions, and whether existing concrete needs to be demolished all add to the quote.
DIY vs. Contractor
Pouring your own concrete is realistic for slabs under 50 sq ft using bagged mix, or for larger pours if you have experience and can rent a mixer. For slabs over 1 cubic yard, renting a concrete pump or ordering ready-mix is more economical than mixing by hand. A 10×10 slab requires about 74 bags of 60lb mix — that's a lot of mixing. Contractor pours typically run $4–$8 per sq ft for labor on a straightforward project.
How to Get an Accurate Material Estimate
Use the concrete slab calculator above to get exact cubic yards and bag counts for your dimensions. The calculator accounts for waste and lets you choose thickness. For ready-mix, your supplier will need cubic yards. For bagged mix, the calculator shows both 60lb and 80lb bag counts. Always order 10% extra — short pours mid-job cause cold joints that weaken the slab.
Calculate your estimate
Quick Fill
Buy MaterialsAD
Top PickQuikrete 60lb Concrete Mix — Home Depot~$4.98/bag* Affiliate links — we may earn a commission at no cost to you.
Related Calculators
Frequently Asked Questions
How much does a 10×10 concrete patio cost?
A 10×10 concrete patio (100 sq ft, 4 inches thick) costs $600–$1,200 installed for a basic broom finish. Material costs are $150–$180 for concrete plus forms and rebar. If you pour it yourself with bagged mix, material cost drops to about $370–$450 total.
Is 4 inches thick enough for a patio?
Yes — 4 inches is the standard residential patio thickness and meets most building codes for foot traffic. Use 6 inches if the patio will support vehicle weight, a hot tub, or heavy planters over 500 lbs. Thicker slabs also resist cracking better in freeze-thaw climates.
How many bags of concrete do I need for a 10×10 patio?
A 10×10 patio at 4 inches thick requires about 1.23 cubic yards of concrete. Using 60lb bags (0.45 cu ft each), that's approximately 74 bags. With 80lb bags (0.60 cu ft), you need about 56 bags. Always buy 10% extra to account for waste.
Can I pour a concrete patio myself?
Yes, for slabs under 50 sq ft or if you have experience with concrete work. For a 10×10 patio, you'd mix 74 bags of concrete — a full day of hard work. Consider renting a concrete mixer or ordering ready-mix delivered if you're doing anything larger. Ready-mix has a minimum order (usually 1 cubic yard, ~$200) but is far less labor-intensive.
What is the cheapest concrete patio finish?
A broom finish (dragging a stiff broom across wet concrete) is the cheapest option — it's included in standard labor and provides good traction. Exposed aggregate is a step up ($2–$4/sq ft more). Stamped concrete is the most expensive decorative option ($8–$18/sq ft more) but mimics stone, brick, or wood at a fraction of the material cost.